bwHPC Wiki - User contributions [en]

BwUniCluster2.0/Software/Ansys

2019-04-17T09:11:41Z

N Tu: /* ANSYS Fluent batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
see http://www.scc.kit.edu/produkte/6724.php > "Kurzanleitung" > "#FLUENT-Aufruf_auf_den_Linux-Clustern_des_SCC"

== ANSYS CFX batch jobs ==
see http://www.scc.kit.edu/produkte/3852.php > "Kurzanleitung" > "#CFX_auf_den_Linux-Clustern_des_SCC"

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2019-04-17T09:09:57Z

N Tu: /* ANSYS CFX batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=28
#MSUB -l walltime=0:60:00
#MSUB -l mem=120000mb
## setup environment
module load cae/ansys
module load system/ssh_wrapper/0.1
export MPI_USESRUN=1
export FLUENT_SSH=/opt/bwhpc/common/system/ssh_wrapper/0.1/ssh
export FLUENT_SKIP_SSH_CHECK=1
export I_MPI_HYDRA_BOOTSTRAP="slurm"
export I_MPI_HYDRA_RMK="slurm"
export I_MPI_HYDRA_BRANCH_COUNT="-1"
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
## start fluent job
time fluent 3d -mpi=intel -g -t56 -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
see http://www.scc.kit.edu/produkte/3852.php > "Kurzanleitung" > "#CFX_auf_den_Linux-Clustern_des_SCC"

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2019-04-17T09:09:42Z

N Tu: /* ANSYS CFX batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=28
#MSUB -l walltime=0:60:00
#MSUB -l mem=120000mb
## setup environment
module load cae/ansys
module load system/ssh_wrapper/0.1
export MPI_USESRUN=1
export FLUENT_SSH=/opt/bwhpc/common/system/ssh_wrapper/0.1/ssh
export FLUENT_SKIP_SSH_CHECK=1
export I_MPI_HYDRA_BOOTSTRAP="slurm"
export I_MPI_HYDRA_RMK="slurm"
export I_MPI_HYDRA_BRANCH_COUNT="-1"
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
## start fluent job
time fluent 3d -mpi=intel -g -t56 -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
see http://www.scc.kit.edu/produkte/3852.php > "Kurzanleitung" > "#CFX_auf_den_Linux-Clustern_des_SCC"

</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-07-26T08:45:45Z

N Tu: /* ANSYS Fluent batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=28
#MSUB -l walltime=0:60:00
#MSUB -l mem=120000mb
## setup environment
module load cae/ansys
module load system/ssh_wrapper/0.1
export MPI_USESRUN=1
export FLUENT_SSH=/opt/bwhpc/common/system/ssh_wrapper/0.1/ssh
export FLUENT_SKIP_SSH_CHECK=1
export I_MPI_HYDRA_BOOTSTRAP="slurm"
export I_MPI_HYDRA_RMK="slurm"
export I_MPI_HYDRA_BRANCH_COUNT="-1"
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
## start fluent job
time fluent 3d -mpi=intel -g -t56 -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=28
#MSUB -l walltime=0:60:00
#MSUB -l mem=120000mb
## setup environment
module load cae/ansys
export CFX5RSH=ssh
export MPI_USESRUN=1
export I_MPI_HYDRA_BOOTSTRAP="slurm"
export I_MPI_HYDRA_RMK="slurm"
export I_MPI_HYDRA_BRANCH_COUNT="-1"
hostlist=$(srun hostname -s)
hostlist=`echo $hostlist| sed 's/ /,/g'`
## start cfx job
cfx5solve -def test.def -par-dist $hostlist -start-method 'Intel MPI Distributed Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-07-26T08:38:31Z

N Tu: /* ANSYS CFX batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
## setup environment
export MPI_USESRUN=1
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
module load cae/ansys
module load system/ssh_wrapper/0.1
## start fluent job
time fluent 3d -mpi=intel -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=28
#MSUB -l walltime=0:60:00
#MSUB -l mem=120000mb
## setup environment
module load cae/ansys
export CFX5RSH=ssh
export MPI_USESRUN=1
export I_MPI_HYDRA_BOOTSTRAP="slurm"
export I_MPI_HYDRA_RMK="slurm"
export I_MPI_HYDRA_BRANCH_COUNT="-1"
hostlist=$(srun hostname -s)
hostlist=`echo $hostlist| sed 's/ /,/g'`
## start cfx job
cfx5solve -def test.def -par-dist $hostlist -start-method 'Intel MPI Distributed Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-02-22T09:01:48Z

N Tu: /* ANSYS CFX batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
## setup environment
export MPI_USESRUN=1
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
module load cae/ansys
module load system/ssh_wrapper/0.1
## start fluent job
time fluent 3d -mpi=intel -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb
## setup environment
module load cae/ansys
export MPI_USESRUN=1
export CFX5RSH=ssh
hostlist=$(srun hostname -s)
hostlist=`echo $hostlist| sed 's/ /,/g'`
## start cfx job
cfx5solve -def test.def -par-dist $hostlist -start-method 'Intel MPI Local Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-02-22T09:01:08Z

N Tu: /* ANSYS Fluent batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
## setup environment
export MPI_USESRUN=1
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
module load cae/ansys
module load system/ssh_wrapper/0.1
## start fluent job
time fluent 3d -mpi=intel -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## load ansys module
module load cae/ansys

## setup environment
export MPI_USESRUN=1
export CFX5RSH=ssh
hostlist=$(srun hostname -s)
hostlist=`echo $hostlist| sed 's/ /,/g'`

## start job
cfx5solve -def test.def -par-dist $hostlist -start-method 'Intel MPI Local Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-02-22T09:00:19Z

N Tu: /* ANSYS Fluent batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys
module load system/ssh_wrapper/0.1

## start fluent job
time fluent 3d -mpi=intel -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## load ansys module
module load cae/ansys

## setup environment
export MPI_USESRUN=1
export CFX5RSH=ssh
hostlist=$(srun hostname -s)
hostlist=`echo $hostlist| sed 's/ /,/g'`

## start job
cfx5solve -def test.def -par-dist $hostlist -start-method 'Intel MPI Local Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-01-30T15:23:15Z

N Tu: /* ANSYS Fluent batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=`srun hostname -s`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -mpi=intel -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## load ansys module
module load cae/ansys

## setup environment
export MPI_USESRUN=1
export CFX5RSH=ssh
hostlist=$(srun hostname -s)
hostlist=`echo $hostlist| sed 's/ /,/g'`

## start job
cfx5solve -def test.def -par-dist $hostlist -start-method 'Intel MPI Local Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-01-30T15:16:12Z

N Tu: /* ANSYS CFX batch jobs */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=$(srun hostname)
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -rsh=ssh -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## load ansys module
module load cae/ansys

## setup environment
export MPI_USESRUN=1
export CFX5RSH=ssh
hostlist=$(srun hostname -s)
hostlist=`echo $hostlist| sed 's/ /,/g'`

## start job
cfx5solve -def test.def -par-dist $hostlist -start-method 'Intel MPI Local Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-01-30T15:12:00Z

N Tu: /* Versions and Availability */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/16.2
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=$(srun hostname)
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -rsh=ssh -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## setup environment
export MPI_USESRUN=1

## load ansys module
module load cae/ansys

## start job
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-01-30T15:11:33Z

N Tu: /* Versions and Availability */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=$(srun hostname)
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -rsh=ssh -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## setup environment
export MPI_USESRUN=1

## load ansys module
module load cae/ansys

## start job
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-01-30T15:10:19Z

N Tu: /* Loading the Module */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=$(srun hostname)
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -rsh=ssh -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## setup environment
export MPI_USESRUN=1

## load ansys module
module load cae/ansys

## start job
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2018-01-30T15:07:34Z

N Tu: /* Versions and Availability */

{| width=600px class="wikitable"
|-
! Description !! Content
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]] | bwGRiD-Tübingen
|-
| License
| Academic. See: [http://www.ansys.com/Academic/educator-tools/Licensing+&+Terms+of+Use Licensing and Terms-of-Use].
|-
| Citing
| [http://www.ansys.com/academic/educator-tools/ Citations]
|-
| Links
| [http://www.ansys.com/ Ansys Homepage] | [http://www.ansys.com/Academic/educator-tools/Support+Resources Support and Resources]
|-
| Graphical Interface
| Yes
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A list of versions currently available on all bwHPC-C5-Clusters can be obtained from the
 
<big>

[https://cis-hpc.uni-konstanz.de/prod.cis/ Cluster Information System CIS]

</big>
{{#widget:Iframe
|url=https://cis-hpc.uni-konstanz.de/prod.cis/bwUniCluster/cae/ansys
|width=99%
|height=350
|border=0
}}
 
On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/17.2
cae/ansys/18.2

</pre>
The cae/ansys modules are using the KIT license server and is reserved for members of the KIT only.
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0_bw
</pre>
to load the version 15.0 with the BW license.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=$(srun hostname)
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -rsh=ssh -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## setup environment
export MPI_USESRUN=1

## load ansys module
module load cae/ansys

## start job
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2015-06-18T14:31:55Z

N Tu: /* ANSYS Fluent batch jobs */

{|{{Softwarebox}}
|-
! colspan="2" style="text-align:center" | Name
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]]
|-
| License
| academic
|-

| Links
| [http://www.ansys.com/ Homepage]
|-
| Graphical Interface
| Yes
|-

|}

= Description =
ANSYS is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A current list of the versions available on the bwUniCluster and bwForclusters can be obtained from the Cluster Information System: [http://cis-hpc.uni-konstanz.de/prod.cis/ CIS Information on ANSYS]

On the command line interface of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
-------------------------- /opt/bwhpc/kit/modulefiles --------------------------
cae/ansys/15.0

------------------------ /opt/bwhpc/common/modulefiles -------------------------
cae/ansys/15.0_bw
</pre>
There are two licenses. The module <pre>cae/ansys/15.0_bw</pre> uses the BW license server (25 academic research, 69 parallel processes) and <pre>cae/ansys/15.0</pre> uses the KIT license server (only members of the KIT can use it).
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of ANSYS you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0_bw
</pre>
to load the version 15.0 with the BW license.

You can load the default version of ANSYS with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS Mechanical session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Mechanical batch jobs ==

The following script could be submitted to the queueing system to run an ANSYS Mechanical job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/common/cae/ansys_inc150/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=$(srun hostname)
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -rsh=ssh -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## setup environment
export MPI_USESRUN=1

## load ansys module
module load cae/ansys

## start job
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2014-05-26T08:14:28Z

N Tu: /* ANSYS Fluent batch jobs */

{|{{Softwarebox}}
|-
! colspan="2" style="text-align:center" | Name
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]]
|-
| License
| academic
|-

| Links
| [http://www.ansys.com/ Homepage]
|-
| Graphical Interface
| Yes
|-

|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A current list of the versions available on the bwUniCluster and bwForclusters can be obtained from the Cluster Information System: [http://cis-hpc.uni-konstanz.de/prod.cis/ CIS Information on ANSYS]

On the command line interface (CLI) of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
</pre>
 

= Usage =
== Loading the Module ==
If you wish to load a specific version of "ANSYS" you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0

You can load the default version of ''ANSYS'' with the command:
<pre>
$ module load cae/ansys
</pre>

== Start commands ==
To start an ANSYS APDL session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS APDL batch jobs ==
The following script could be submitted to the queueing system to run an ANSYS APDL job in parallel:
{{bwFrameA|
<source lang="bash">
#!/bin/bash
module load cae/ansys/15.0
export MPIRUN_OPTIONS="-prot"
export MPI_USESRUN=1
cd Arbeitsverzeichnis
export MACHINES=`/software/bwhpc/kit/cae/ansys_inc15/scc/machines.pl`
ansys150 -dis -b -j lal -machines $MACHINES < input.f18
</source>
}}

working_dir could start with $HOME or $WORK .

To submit the example script to the queueing system execute the following (32 cores, 1 GB of memory per core, max. time 600 seconds) :
<pre>
msub -l nodes=2:ppn=16,pmem=1000mb,walltime=600 Shell-Script
</pre>

== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb

## setup environment
export MPI_USESRUN=1

## generate hosts list
export run_nodes=`srun hostname`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts

## load ansys module
module load cae/ansys

## start fluent job
time fluent 3d -g -pib -cnf=fluent.hosts -i test.inp
</source>
}}
To submit the example script to the queueing system execute the following:
<pre>
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
{{bwFrameA|
<source lang="bash">
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb

## setup environment
export MPI_USESRUN=1

## load ansys module
module load cae/ansys

## start job
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'
</source>
}}
To submit the example script to the queueing system execute:
<pre>
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2014-05-16T08:53:47Z

N Tu:

{|{{Softwarebox}}
|-
! colspan="2" style="text-align:center" | Name
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]]
|-
| License
| academic
|-
|Citing
|
|-
| Links
| [http://www.ansys.com/ Homepage]
|-
| Graphical Interface
| Yes
|-
| User Forum
|
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/ http://www.ansys.com/Industries/Academic/]
 
 

= Versions and Availability =
A current list of the versions available on the bwUniCluster and bwForclusters can be obtained from the Cluster Information System: [http://cis-hpc.uni-konstanz.de/prod.cis/ CIS Information on ANSYS]

On the command line interface (CLI) of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
</pre>
 

= Usage =
== Loading the Module ==
You can load the default version of ''ANSYS'' with the command:
<pre>
$ module load cae/ansys
</pre>

If you wish to load a specific (older) version of "ANSYS" you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0
 

== Start commands ==
To start an ANSYS session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
<pre>
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
export MPI_USESRUN=1
export run_nodes=`srun hostname`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
time fluent 3d -g -t4 -pib -cnf=fluent.hosts -i test.inp
</pre>
To submit the example script to the queueing system execute the following:
<pre>
$ module load cae/ansys/15.0
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
<pre>
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb
export MPI_USESRUN=1
export PATH=/software/bwhpc/kit/cae/ansys_inc15/v150/CFX/bin:$PATH
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'

</pre>
To submit the example script to the queueing system execute:
<pre>
$ module load cae/ansys/15.0
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2014-05-16T08:12:37Z

N Tu:

{|{{Softwarebox}}
|-
! colspan="2" style="text-align:center" | Name
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]]
|-
| License
| academic
|-
|Citing
|
|-
| Links
| [http://www.ansys.com/ Homepage]
|-
| Graphical Interface
| Yes
|-
| User Forum
|
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/Overview/ http://www.ansys.com/Industries/Academic/Overview/]
 
 

= Versions and Availability =
A current list of the versions available on the bwUniCluster and bwForclusters can be obtained from the Cluster Information System: [http://cis-hpc.uni-konstanz.de/prod.cis/ CIS Information on ANSYS]

On the command line interface (CLI) of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
</pre>
 

= Usage =
== Loading the Module ==
You can load the default version of ''ANSYS'' with the command:
<pre>
$ module load cae/ansys
</pre>

If you wish to load a specific (older) version of "ANSYS" you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0
 

== Start commands ==
To start an ANSYS session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
<pre>
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
export MPI_USESRUN=1
export run_nodes=`srun hostname`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
time fluent 3d -g -t4 -pib -cnf=fluent.hosts -i test.inp
</pre>
To submit the example script to the queueing system execute the following:
<pre>
$ module load cae/ansys/15.0
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
<pre>
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb
export MPI_USESRUN=1
export PATH=/software/bwhpc/kit/cae/ansys_inc15/v150/CFX/bin:$PATH
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'

</pre>
To submit the example script to the queueing system execute:
<pre>
$ module load cae/ansys/15.0
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2014-05-15T09:33:10Z

N Tu:

{|{{Softwarebox}}
|-
! colspan="2" style="text-align:center" | Name
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]]
|-
| License
| commerical
|-
|Citing
|
|-
| Links
| [http://www.ansys.com/ Homepage]
|-
| Graphical Interface
| Yes
|-
| User Forum
|
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/Overview/ http://www.ansys.com/Industries/Academic/Overview/]
 
 

= Versions and Availability =
A current list of the versions available on the bwUniCluster and bwForclusters can be obtained from the Cluster Information System: [http://cis-hpc.uni-konstanz.de/prod.cis/ CIS Information on ANSYS]

On the command line interface (CLI) of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
</pre>
 

= Usage =
== Loading the Module ==
You can load the default version of ''ANSYS'' with the command:
<pre>
$ module load cae/ansys
</pre>

If you wish to load a specific (older) version of "ANSYS" you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0
 

== Start commands ==
To start an ANSYS session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
<pre>
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
export MPI_USESRUN=1
export run_nodes=`srun hostname`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
time fluent 3d -g -t4 -pib -cnf=fluent.hosts -i test.inp
</pre>
To submit the example script to the queueing system execute the following:
<pre>
$ module load cae/ansys/15.0
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
<pre>
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb
export MPI_USESRUN=1
export PATH=/software/bwhpc/kit/cae/ansys_inc15/v150/CFX/bin:$PATH
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'

</pre>
To submit the example script to the queueing system execute:
<pre>
$ module load cae/ansys/15.0
$ msub run_cfx.sh
</pre>
 

----
[[Category:Engineering software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2014-05-15T09:22:31Z

N Tu:

{|{{Softwarebox}}
|-
! colspan="2" style="text-align:center" | Name
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]]
|-
| License
| commerical
|-
|Citing
|
|-
| Links
| [http://www.ansys.com/ Homepage]
|-
| Graphical Interface
| Yes
|-
| User Forum
|
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information about ANSYS products please visit [http://www.ansys.com/Industries/Academic/Overview/ http://www.ansys.com/Industries/Academic/Overview/]
 
 

= Versions and Availability =
A current list of the versions available on the bwUniCluster and bwForclusters can be obtained from the Cluster Information System: [http://cis-hpc.uni-konstanz.de/prod.cis/ CIS Information on ANSYS]

On the command line interface (CLI) of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
</pre>
 

= Usage =
== Loading the Module ==
You can load the default version of ''ANSYS'' with the command:
<pre>
$ module load cae/ansys
</pre>

If you wish to load a specific (older) version of "ANSYS" you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0
 

== Start commands ==
To start an ANSYS session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
<pre>
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
export MPI_USESRUN=1
export run_nodes=`srun hostname`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
time fluent 3d -g -t4 -pib -cnf=fluent.hosts -i test.inp
</pre>
To submit the example script to the queueing system execute the following:
<pre>
$ module load cae/ansys/15.0
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
<pre>
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb
export MPI_USESRUN=1
export PATH=/software/bwhpc/kit/cae/ansys_inc15/v150/CFX/bin:$PATH
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'

</pre>
To submit the example script to the queueing system execute:
<pre>
$ module load cae/ansys/15.0
$ msub run_cfx.sh
</pre>
 

----
[[Category:Chemistry software]][[Category:bwUniCluster]]

BwUniCluster2.0/Software/Ansys

2014-05-15T09:16:57Z

N Tu: Created page with " {|{{Softwarebox}} |- ! colspan="2" style="text-align:center" | Name |- | module load | cae/ansys |- | Availability | [[bwUniClust…"

{|{{Softwarebox}}
|-
! colspan="2" style="text-align:center" | Name
|-
| module load
| cae/ansys
|-
| Availability
| [[bwUniCluster]]
|-
| License
| commerical
|-
|Citing
|
|-
| Links
| [http://www.ansys.com/ Homepage]
|-
| Graphical Interface
| Yes
|-
| User Forum
|
|}

= Description =
'''ANSYS''' is a general purpose software to simulate interactions of all disciplines of physics, structural, fluid dynamics, heat transfer, electromagnetic etc. For more information on ANSYS products please visit [http://www.ansys.com/Industries/Academic/Overview/ http://www.ansys.com/Industries/Academic/Overview/]
 
 

= Versions and Availability =
A current list of the versions available on the bwUniCluster and bwForclusters can be obtained from the Cluster Information System: [http://cis-hpc.uni-konstanz.de/prod.cis/ CIS Information on ANSYS]

On the command line interface (CLI) of a particular bwHPC cluster a list of all available ANSYS versions can be inquired as followed
<pre>
$ module avail cae/ansys
</pre>
 

= Usage =
== Loading the Module ==
You can load the default version of ''ANSYS'' with the command:
<pre>
$ module load cae/ansys
</pre>

If you wish to load a specific (older) version of "ANSYS" you can do so by executing e.g.:
<pre>
$ module load cae/ansys/15.0
</pre>
to load the version 15.0
 

== Start commands ==
To start an ANSYS session enter
<pre>
$ ansys150
</pre>
To launch an ANSYS FLUENT session enter
<pre>
$ fluent
</pre>
The following command is to run the ANSYS Workbench
<pre>
$ runwb2
</pre>
Online documention is available from the help menu or by using the command
<pre>
$ anshelp150
</pre>
As with all processes that require more than a few minutes to run, non-trivial ANSYS solver jobs must be submitted to the cluster queueing system.
 

= Examples =
== ANSYS Fluent batch jobs ==
The following script "run_fluent.sh" could be submitted to the queueing job system to run an ANSYS Fluent job in parallel using 4 cores on a single node:
<pre>
#!/bin/sh
#MSUB -l nodes=1:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=16000mb
export MPI_USESRUN=1
export run_nodes=`srun hostname`
echo $run_nodes | sed "s/ /\n/g" > fluent.hosts
echo "" >> fluent.hosts
time fluent 3d -g -t4 -pib -cnf=fluent.hosts -i test.inp
</pre>
To submit the example script to the queueing job system execute the following:
<pre>
$ module load cae/ansys/15.0
$ msub run_fluent.sh
</pre>
 

== ANSYS CFX batch jobs ==
With the script "run_cfx.sh" you can submit a CFX job to the queueing job system to run in parallel using 8 cores on two node with the start-method 'Platform MPI Parallel':
<pre>
#!/bin/sh
#MSUB -l nodes=2:ppn=4
#MSUB -l walltime=0:10:00
#MSUB -l mem=32000mb
export MPI_USESRUN=1
export PATH=/software/bwhpc/kit/cae/ansys_inc15/v150/CFX/bin:$PATH
cfx5solve -def test.def -part 8 -start-method 'Platform MPI Parallel'

</pre>
To submit the example script to the queueing job system execute:
<pre>
$ module load cae/ansys/15.0
$ msub run_cfx.sh
</pre>
 

----
[[Category:Chemistry software]][[Category:bwUniCluster]]