Software Modules Lmod: Difference between revisions
No edit summary |
|||
| Line 173: | Line 173: | ||
I.e., loading of the ''intel'' compiler is built-in the ''orca'' module. |
I.e., loading of the ''intel'' compiler is built-in the ''orca'' module. |
||
== |
== Other topics == |
||
=== Complete list of Lmod options and sub-commands === |
=== Complete list of Lmod options and sub-commands === |
||
Revision as of 23:32, 5 July 2020
Software Module System - Lmod
Preface
This guide describes the software environment and tools used to run applications on JUSTUS 2 system. It is intended as a general overview and introduction to the software system management on JUSTUS 2 for new users as well as for experienced users coming, e.g. from sites planted with different Environment modules package, as for example JUSTUS 1 system.
For users migrating from JUSTUS 1 to JUSTUS 2
There exist several software implementations for a dynamical management of environmental variables throughout the HPC world.
JUSTUS 1 hosted Environment Modules package based on Tcl, while there is a Lua based module system Lmod (https://lmod.readthedocs.io/en/latest/#) installed on JUSTUS 2.
Despite of the various software solutions, the difference in handling of the modules from users' perspective of view stays tiny. The biggest change lies in the introducing of the partial software hierarchy implemented in modules system on JUSTUS 2. Besides that, Lmod extends the basic environment modules by adding predefined shortcuts and a more powerful search capability.
Lmod commnads
The much of module commands and its functionality has remained same on JUSTUS 2, although Lmod offers new functions as for example module spider as an extension of "old" module avail functionality.
Thus, e.g. the default Gaussian module is initialized by
$ module load chem/gaussian
which is pretty much the same as on JUSTUS 1 or with using of the Lmod shorthand version
$ ml chem/gaussian
Full list of the Lmod module commands is available online on https://lmod.readthedocs.io/en/latest/010_user.html
Rather than the divergence of module commands, JUSTUS 1 users has to get a grasp of the modulefile system hierarchy built-in JUSTUS 2 software layout.
The layout is no more flat as on JUSTUS 1, however JUSTUS 2 adopts a partial module hierarchy for mpi modules.
Consequences of the partial module hierarchy for mpi modules
Due the flat layout of software modules on JUSTUS 1 module avail command showed all pre-installed software packages including those directly depended on another modules.
This is no more true on JUSTUS 2, in particular for mpi modules. mpi modules remains invisible for a user (prompted module avail) until some compiler module has been loaded. Once the compiler module has been activated corresponding mpi modules, i.e. built with the particular compiler, become visible.
E.g., with the originally empty list of the loaded modules, the module command
$ module avail
or its shorthand analogue
$ ml av
displays no mpi module available. After running
ml compiler/intel/19.1 ml av
mpi packages compatible with the intel 19.1 compiler becomes visible
------------ /opt/bwhpc/common/modulefiles/Compiler/intel/19.1 -------------------- mpi/impi/2019.7 mpi/openmpi/4.0
in the list of the available software.
Lmod Module System on JUSTUS 2
JUSTUS 2 system uses Lmod (the Lua Based Module System) environment management package to support dynamical modification of the user environment via modulefiles. Each modulefile contains information needed to configure the shell, i.e. its environmental variables, required to run a particular software application. To make major changes in the users' environment, such as modifications of PATH, LD_LIBRARY_PATH, CC or FC variables for, e.g. a switching to a different compiler, use the appropriate single or sequence of modules commands instead of a reconfiguration of the shell by hand.
E.g. in order to activate the default vasp module run a single command:
$ module load chem/vasp
or its shorthand variant
$ml chem/vasp
For an activation of the module of intel mpi built with the corresponding intel compiler a sequence of two module commands
$ module load compiler/intel $ module load mpi/impi
has to be run.
Online user guide of Lmod
The complete user guide can be found on Lmod websites https://lmod.readthedocs.io/en/latest/010_user.html
Which shells supports module commands?
So far Bash is only supported shell on JUSTUS 2 to interpret module commands.
Basic Module System tasks
Lmod offers more than 25 sub-commands plus various options to manage the modulefile system installed on JUSTUS 2. See, e.g. output of "module --help" command. Large majority of users will use only couple of them. A complete list of module sub-commands can be displayed by entering "module --help" command or in Lmod online documentation. The following text lists only a couple of them.
Lmod shortcuts
Lmod extends the basic environment modules by adding simple shortcuts. The ml shortcut can be used in place of module, av in instead of avail, ml instead of module list, or - can alternate unload.
For instance, following combinations are interchangeble:
module list <==> ml
module avail <==> ml av
module load compiler/intel <==> ml compiler/intel
module unload compiler/intel <==> ml -compiler/intel
Loading and unloading modulefiles
To load and unload a module of a specific package use "module load category/package" and "module unload category/package", respectively. Thus, e.g, to load default version of VASP which belongs into category chem, enter
$ module load chem/VASP
and for unloading of the package use
$ module unload chem/VASP
Complete unloading of all modulefiles
To clean the environment from all entries set by lmod use "module purge" command.
$ module purge
Beware that the "module purge" does not always restore the environmental variables that existed prior entering first "module load" command. I.e., some of the entries in PATH, or environmental variables, etc. originally existed in the environment might be cleaned by "module purge" if those would be duplicates of the variables set by any modulefiles that was loaded.
What is Loaded Now?
To see which modules are currently loaded in your environment, enter the command "module list".
$ module list
Which modulefiles/software is available?
To see what modulefiles are available on JUSTUS 2, you can enter the following command:
$ module avail
or alternatively
$ ml av
which comes with lmod to save typewriting.
Module specific help
To access the module specific help, use the "module help" command. For example, to see the module help associated with the default VASP module, enter this command:
$ module help chem/vasp
It is always a good practice to read through all the info provided by a specific module help since this serves as an important communication channel between a user and the person who install the piece of a software.
Semi hierarchical layout of modules on JUSTUS 2
Module hierarchy in Lmod
The structure of software modules on JUSTUS 2 exploits a "semi" hierarchical structure. This is slightly different from what can be seen on another HPC systems with "full" hierarchical structure. The typical systems with full hierarchy put compiler modules (i.e., intel, gcc) in the uppermost (Core) level, depending libraries (e.g., MPI) on the second level, and more depending libraries on a third level. As a consequence, not all the modules contained in the module system are initially visible, namely the modules putted in the second and third layer. Only after a loading a compiler module, the modules of the second layer directly depending on the particular compiler will become available. And similarly, loading an MPI module will make the modules of the third layer depending on the loaded MPI library visible.
Semi hierarchy of software stack on JUSTUS 2
JUSTUS 2 adopted the hierarchical structure of the modules layout only partially. In particular, there is only "Core" and the "second" level presented and there are only mpi modules contained in the second level. All other modules, i.e. for example those from the "chem" sub-cathegory such as vasp, turbomole, or gaussian, or those located in the "numlib" sub-cathegory such as mkl or python_numpy, are embodied in the "Core" level.
Module dependency
The adopted hierarchy models is not the only tool handling the module dependency. As a matter of fact, most of the modules on JUSTUS 2 require a provision of functionalities from another modules, albeit located in the "Core" level. Such provisioning is implemented in a modulefile either automatically without a need of any action from the user (the depending modulefile, while loading, loads all additional modules automatically) or the depending modulefile, while loading, informs the user about necessity to pre-load additional modules if those has not been activated yet (in this case the user must repeat the loading operation). Which of the solution is applied rests with the decision of the person who built the particular module.
An example of module with the implemented automated pre-loading is orca module. With the pre-emptied list of the loading modules, i.e.
$ ml
shows
No modules loaded
, the command sequence
$ ml chem/orca $ ml
shows
Currently Loaded Modules: 1) compiler/intel/19.1 2) chem/orca/4.2.1
I.e., loading of the intel compiler is built-in the orca module.
Other topics
Complete list of Lmod options and sub-commands
The whole list of module options and all commands available can be displayed by running
man module
with the output showing
Usage: module [options] sub-command [args ...]
Options:
-h -? -H --help This help message
-s availStyle --style=availStyle Site controlled avail style: system
(default: system)
--regression_testing Lmod regression testing
-D Program tracing written to stderr
--debug=dbglvl Program tracing written to stderr (where
dbglvl is a number 1,2,3)
--pin_versions=pinVersions When doing a restore use specified
version, do not follow defaults
-d --default List default modules only when used with
avail
-q --quiet Do not print out warnings
--expert Expert mode
-t --terse Write out in machine readable format for
commands: list, avail, spider, savelist
--initial_load loading Lmod for first time in a user
shell
--latest Load latest (ignore default)
--ignore_cache Treat the cache file(s) as out-of-date
--novice Turn off expert and quiet flag
--raw Print modulefile in raw output when used
with show
-w twidth --width=twidth Use this as max term width
-v --version Print version info and quit
-r --regexp use regular expression match
--gitversion Dump git version in a machine readable
way and quit
--dumpversion Dump version in a machine readable way
and quit
--check_syntax --checkSyntax Checking module command syntax: do not
load
--config Report Lmod Configuration
--config_json Report Lmod Configuration in json format
--mt Report Module Table State
--timer report run times
--force force removal of a sticky module or save
an empty collection
--redirect Send the output of list, avail, spider
to stdout (not stderr)
--no_redirect Force output of list, avail and spider
to stderr
--show_hidden Avail and spider will report hidden
modules
--spider_timeout=timeout a timeout for spider
-T --trace
module [options] sub-command [args ...]
Help sub-commands:
------------------
help prints this message
help module [...] print help message from module(s)
Loading/Unloading sub-commands:
-------------------------------
load | add module [...] load module(s)
try-load | try-add module [...] Add module(s), do not complain if not
found
del | unload module [...] Remove module(s), do not complain if not
found
swap | sw | switch m1 m2 unload m1 and load m2
purge unload all modules
refresh reload aliases from current list of
modules.
update reload all currently loaded modules.
Listing / Searching sub-commands:
---------------------------------
list List loaded modules
list s1 s2 ... List loaded modules that match the
pattern
avail | av List available modules
avail | av string List available modules that contain
"string".
spider List all possible modules
spider module List all possible version of that module
file
spider string List all module that contain the
"string".
spider name/version Detailed information about that version
of the module.
whatis module Print whatis information about module
keyword | key string Search all name and whatis that contain
"string".
Searching with Lmod:
--------------------
All searching (spider, list, avail, keyword) support regular expressions:
-r spider '^p' Finds all the modules that start with
`p' or `P'
-r spider mpi Finds all modules that have "mpi" in
their name.
-r spider 'mpi$ Finds all modules that end with "mpi" in
their name.
Handling a collection of modules:
--------------------------------
save | s Save the current list of modules to a
user defined "default" collection.
save | s name Save the current list of modules to
"name" collection.
reset The same as "restore system"
restore | r Restore modules from the user's
"default" or system default.
restore | r name Restore modules from "name" collection.
restore system Restore module state to system defaults.
savelist List of saved collections.
describe | mcc name Describe the contents of a module
collection.
disable name Disable (i.e. remove) a collection.
Deprecated commands:
--------------------
getdefault [name] load name collection of modules or
user's "default" if no name given.
===> Use "restore" instead <====
setdefault [name] Save current list of modules to name if
given, otherwise save as the default
list for you the user.
===> Use "save" instead. <====
Miscellaneous sub-commands:
---------------------------
is-loaded modulefile return a true status if module is loaded
is-avail modulefile return a true status if module can be
loaded
show modulefile show the commands in the module file.
use [-a] path Prepend or Append path to MODULEPATH.
unuse path remove path from MODULEPATH.
tablelist output list of active modules as a lua
table.
Important Environment Variables:
--------------------------------
LMOD_COLORIZE If defined to be "YES" then Lmod prints
properties and warning in color.
--------------------------------------------------------------------------
Lmod Web Sites
Documentation: http://lmod.readthedocs.org
Github: https://github.com/TACC/Lmod
Sourceforge: https://lmod.sf.net
TACC Homepage: https://www.tacc.utexas.edu/research-development/tacc-projects/lmod
To report a bug please read http://lmod.readthedocs.io/en/latest/075_bug_reporting.html
--------------------------------------------------------------------------
Modules based on Lua: Version 8.2.7 2019-11-30 09:41 -06:00
by Robert McLay mclay@tacc.utexas.edu
Module categories, versions and defaults
Software stack on bwHPC systems is commonly classified into following categories:
- chem
- compiler
- devel
- lib
- numlib
- phys
- system
- vis
- math
Each the category is further divided according to software packages and those finally according to software versions. Similarly, the module identifier has the format: category/softwarename/version For instance, gnu compiler of the version 10.1 is unabiguosly addressed as compiler/gnu/10.1 in, e.g. the load command:
$ ml compiler/gnu/10.1
In case of there is multiple software versions, one version is always pre-determined as the default
version. To address a default version, version can be omitted in the module identifier.
For example, the loading of the default intel compiler module is realized via
$ ml compiler/intel
Selective searching
It is possible to perform searching through only selected category by adding name of the cathegory to module avail or ml av command. For example, to only explore the compilers is realized with
$ module avail compiler/
Searching capabilities of module avail commands
The command module avail has a search capabilities. For example
$ ml av gnu
will list for any modulefile with the name containing the string "gnu", i.e. for instance
--------------------------- /opt/bwhpc/common/modulefiles/Core --------------------------------- compiler/gnu/system compiler/gnu/9.3 compiler/gnu/10.1 (D) vis/gnuplot/5.2
How do Modules work?
The default shell on the bwHPC clusters is bash, so explanations and examples will be shown for bash. In general, programs cannot modify the environment of the shell they are being run from, so how can the module command do exactly that?
The module command is not a program, but a bash-function.
You can view its content using:
$ type module
and you will get the following result:
$ type module
module is a function
module ()
{
eval $($LMOD_CMD bash "$@");
[ $? = 0 ] && eval $(${LMOD_SETTARG_CMD:-:} -s sh)
}
In this function, lmod is called. Its output to stdout is then executed inside your current shell using the bash-internal eval command. As a consequence, all output that you see from the module is transmitted via stderr (output handle 2) or in so