BwUniCluster 2.0 User Access

bwUniCluster is Baden-Württemberg's general purpose tier 3 high performance computing (HPC) cluster co-financed by Baden-Württemberg's ministry of science, research and arts and the shareholders:

• Albert Ludwig University of Freiburg
• Eberhard Karls University, Tübingen
• Karlsruhe Institute of Technology (KIT)
• Ruprecht-Karls-Universität Heidelberg
• Ulm University
• University of Hohenheim
• University of Konstanz
• University of Mannheim
• University of Stuttgart
• HAW BW e.V. (an association of university of applied sciences in Baden-Württemberg)

To log on bwUniCluster a user account is required. All members of the shareholder universities can apply for an account.

bwUniCluster wiring © KIT (SCC)

Registration

Granting access and issuing a user account for bwUniCluster requires the registration at the KIT service website https://bwidm.scc.kit.edu (step B). However, this registration depends on the bwUniCluster entitlement issued by your university (step A).

Step A: bwUniCluster entitlement for registration

Each university issues the bwUniCluster entitlement only for their own members. Details on the issuing process and/or the entitlement application forms are listed hereafter:

• Albert Ludwig University of Freiburg
• Eberhard Karls University Tübingen
• Karlsruhe Institute of Technology (KIT)
• Ruprecht-Karls-Universität Heidelberg
• Ulm University
• University of Hohenheim
• University of Konstanz
• University of Mannheim
• University of Stuttgart

Step B: Web Registration

After step A, i.e., after issueing the bwUniCluster entitlement, please visit:

• https://bwidm.scc.kit.edu
  1. Select your home organization from the list and click Proceed
  2. You will be directed to the Identity Provider of your home organisation
  3. Enter your home-organisational user ID / username and your home-organisational password and click Login button
  4. You will be redirected back to the registration website https://bwidm.scc.kit.edu/
  5. Select unter The following services are available the service bwUniCluster
     

     
  6. Click Register
  7. Finally
     • for all non-KIT members mandatorily set a service password for authentication on bwUniCluster
     • for KIT members optionally set a service password for authentication on bwUniCluster

Step B: Amendment: bwUniCluster questionnaire

Starting June 1st, 2015, usage of bwUniCluster mandatorily requires the questionnaire

  https://www.bwhpc-c5.de/en/ZAS/bwunicluster_survey.php

to be answered. The input is solely used for the elaboration of future support activities and for planning future HPC resources. From June 1st, 2015, login to bwUniCluster is only permitted to users who have already answered the questionnaire. Exception: For the first 14 days after the web registration login to bwUniCluster is permitted without participation in the questionnaire.

Changing Password

By default, for KIT members your bwUniCluster password to log on matches that one of your KIT account, while for all non-KIT members your bwUniCluster password is that one you saved during the web registration (compare step 7 of chapter 1.2). At any time, you can set a new bwUniCluster password via the registration website https://bwidm.scc.kit.edu by carrying out the following steps:

1. visit https://bwidm.scc.kit.edu and select your home organization
2. authenticate yourself via your home-organizational user id / username and your home-organizational password
3. find on the left side bwUniCluster and select Set Service Password
4. set new service, i.e. bwUniCluster, password, repeat it and click Save button.
5. the page answers e.g. "Das Passwort wurde bei dem Dienst geändert" ("password has been changed")
6. proceed to log in using the new password in the next step

Contact

If you have questions or problems concerning bwUniCluster registration, please contact your local hotline.

Login

After finishing the web registration bwUniCluster is ready for your SSH based login. bwUniCluster has two dedicated login nodes. The selection of the login node is done automatically and is based on a round-robin scheduling. Logging in another time the session might run on the other login node.

Only the secure shell SSH is allowed to login. Other protocols like telnet or rlogin are not allowed for security reasons.

A connection to bwUniCluster can be established by the command:

$ ssh <UserID>@bwunicluster.scc.kit.edu

If you are using OpenSSH (usually installed on Linux based systems) and you want to use a GUI-based application on bwUniCluster you should use the ssh command with the option -X

$ ssh -X <UserID>@bwunicluster.scc.kit.edu

Hints for using PuTTY

Start PuTTY, fill in at window PuTTY Configuration under category Session the following fields

Host Name        : <UserID>@bwunicluster.scc.kit.edu
Port                  : 22
Connection type : SSH

and click on Open, enter your password and accept adding host key. Note that you can also name the configured session via Save and load it later via the given name.

Hints for using WinSCP

Start WinSCP, fill in the following fields:

File Protocol    : SCP
Host name        : bwunicluster.scc.kit.edu
Port             : 22
User name        : <UserID>

and click on 'Login' and enter your password. Note that you can also name the configured session via Save and load it later via the given name.

About UserID / Username

<UserID> of the ssh command is a placeholder for your username at your home organization together with a prefix as followed:

Home organization	<UserID>
Universität Freiburg	fr_username
Universität Heidelberg	hd_username
Universität Hohenheim	ho_username
KIT	username (without any prefix)
Universität Konstanz	kn_username
Universität Mannheim	ma_username
Universität Stuttgart	st_username
Universität Tübingen	tu_username
Universität Ulm	ul_username
Hochschule Aalen	aa_username
Hochschule Albstadt-Sigmaringen	as_username
Hochschule Esslingen	es_username
Hochschule Furtwangen	hf_username
Hochschule Karlsruhe	hk_username
HTWG Konstanz	ht_username
Hochschule Reutlingen	hr_username
Hochschule Rottenburg	ro_username
Hochschule für Technik Stuttgart	hs_username
Hochschule Ulm	hu_username

Allowed activities on login nodes

The login nodes of bwUniCluster are the access point to the compute system and to your bwUniCluster $HOME directory. The login nodes are shared with all the users of bwUniCluster. Therefore, your activities on the login nodes are limited to primarily set up your batch jobs. Your activities may also be:

• short compilation of your program code and
• short pre- and postprocessing of your batch jobs.

To guarantee usability for all the users of bwUniCluster you must not run your compute jobs on the login nodes. Compute jobs must be submitted to the queueing system. Any compute job running on the login nodes will be terminated without any notice. Any long-running compilation or any long-running pre- or postprocessing of batch jobs must also be submitted to the queueing system.

First steps on bwUniCluster

For setting up your environment to use compilers and installed software please visit:

• bwUniCluster user environment

For guides on how to submit compute jobs to bwUniCluster please visit:

• bwUniCluster batch jobs

Deregistration

If you plan to permanently leave the bwUniCluster, follow the deregister checklist:

1. Transfer all your data in $HOME and workspace to your local computer/storage and after that clear off all your data
2. Visit https://bwidm.scc.kit.edu
   • Select your home organization from the list and click Proceed
   • Enter your home-organisational user ID / username and your home-organisational password and click Login button
   • You will be redirected back to the registration website https://bwidm.scc.kit.edu/
   • Select Registry Info of the service bwUniCluster (on the left hand side)
     

     
   • Click Deregister

Note that Step 2 will automatically unsubscribe you from the bwunicluster mail list.

---