Sds-hd nfs

Prerequisites

• Attention: To access data served by SDS@hd, You need a Service Password. See details Sds-hd_user_access.

• Additionally the access to SDS@hd is currently only available inside the belwue-Network. This means you have to use the VPN Service of your HomeOrganization, if you want to access SDS@hd from outside the bwHPC-Clusters (e.g. via eduroam or from your personal Laptop)

• The access via nfs protocol is machine-based, which means new nfs-Clients have to be registered on SDS@hd. During this registration each machine gets a keytab file, which allows mounting SDS@hd.

• Currently you have to send an email for Clientregistration to SDS@hd Team with the following information:
  • hostname of the new nfs-Client
  • IP address
  • short description
  • location
  • acronym of the Speichervorhaben which should be available on this machine

Using NFSv4 for UNIX client

The authentication for data access via NFSv4 is performed using Kerberostickets. This requires a functioning Kerberos environment on the client!

SDS@hd is a central service for securely storing scientific data (Scientific Data Storage). The service is provided as a state service to researchers of higher education institutions of Baden-Württemberg. It is intended to be used for data that is frequently accessed ('hot data').

News

November 2022: No special entitlement is needed anymore to participate in an existing storage project. September 2023: Service has now been opened for DFN AAI & eduGAIN federation members to participate on existing storage projects.

Training & Support

Service description & FAQ Submit a Ticket

User Documentation

Registration Access Data Security Visualization: bwVisu

Storage Funding

Please acknowledge SDS@hd in your publications. After configuring kerberos, you have to install nfs packages in your system, and enable kerberized NFSv4. The exact names of the packages depending on you linux distribution (see examples below). Example RedHat/CentOS > yum install nfs-utils nfs4-acl-tools /etc/sysconfig/nfs: NEED_IDMAPD=yes NEED_GSSD=yes Example debian/ubuntu > apt install nfs-common nfs4-acl-tools nfs-server /etc/default/nfs-common: NEED_IDMAPD=yes NEED_GSSD=yes On ubuntu server: nfs-kernel-server SDS@hd is a central service for securely storing scientific data (Scientific Data Storage). The service is provided as a state service to researchers of higher education institutions of Baden-Württemberg. It is intended to be used for data that is frequently accessed ('hot data'). News November 2022: No special entitlement is needed anymore to participate in an existing storage project. September 2023: Service has now been opened for DFN AAI & eduGAIN federation members to participate on existing storage projects. Training & Support Service description & FAQ Submit a Ticket User Documentation Registration Access Data Security Visualization: bwVisu Storage Funding Please acknowledge SDS@hd in your publications. To enable the ID-Mapping for NFSv4 mounts change the file /etc/idmapd.conf with the following lines: in /etc/idmapd.conf: [General] Domain = urz.uni-heidelberg.de Local-Realms = BWSERVICES.UNI-HEIDELBERG.DE mount a nfs share The usual restrictions for mounting drives under Linux apply. Usually this can only be done by the superuser "root". For detailed information, please contact the system administrator of your system. After successfull configuration (s. 2.1) you can mount your SDS@hd share with the following commands: > mkdir <mountpoint> > mount -t nfs4 -o sec=krb5,vers=4.0 lsdf02.urz.uni-heidelberg.de:/gpfs/lsdf02/ <mountpoint> To enable the mounting after a restart, you have to add the following line to the file "/etc/fstab" lsdf02.urz.uni-heidelberg.de:/gpfs/lsdf02/ <mountpoint> nfs4 sec=krb5,vers=4.0 0 0 access your data Attention! The access can not be done as root user, because root uses the Kerberosticket of the machine, which does not have data access! To access your data on SDS@hd you have to fetch a valid kerberos ticket with your SDS@hd user and Servicepassword: > kinit hd_xy123 Password for hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE: You can check afterwards your kerberos ticket with: > klist Ticket cache: FILE:/tmp/krb5cc_1000 Default principal: hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE Valid starting Expires Service principal 20.09.2017 04:00:01 21.09.2017 04:00:01 krbtgt/BWSERVICES.UNI-HEIDELBERG.DE@BWSERVICES.UNI-HEIDELBERG.DE renew until 29.09.2017 13:38:49 Afterwards you should be able to access the mountpoint, which contain all Speichervorhaben exported to your machine: > ls <mountpoint> sd16j007 sd17c010 sd17d005 renew a kerberos ticket Because a kerberos ticket has a limited lifetime (default: 10 hours, maximum 24 hours) for security reasons, you have to renew your ticket before it expires to prevent access loss. > kinit -R This renewal could only be done for maximum time of 10 Days and as long as the current kerberos ticket is still valid. For renewal of an expired ticket, you have to use again your Servicepassword. destroy kerberos ticket Even if kerberos tickets are only valid for a limited period of time, a ticket should be destroyed as soon as access is no longer needed to prevent misuse on multi-user systems: kdestroy automated kerberos tickets Attention! Keep this generated Keytab safe and use it only in trusted environments! If your workflow needs a permanent access to SDS@hd for longer than 10 Days, you can use ktutil to encrypt your Service Password into a keytab file: interactive way: ktutil ktutil: addent -password -p hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE -k 1 -e rc4-hmac Password for hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE: ktutil: addent -password -p hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE -k 1 -e aes256-cts Password for hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE: ktutil: wkt xy123.keytab ktuitl: quit non-interactive way: echo -e "addent -password -p hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE -k 1 -e rc4-hmac\n<your_servicepasword>\n addent -password -p hd_xy123@BWSERVICES.UNI-HEIDELBERG.DE -k 1 -e aes256-cts\n<your_servicepasword>\nwkt xy123.keytab" | ktutil With this keytab, you can fetch a kerberos ticket without an interactive password: kinit -k -t xy123.keytab hd_xy123